US Patent #9591390
Setting the industry standard for the most popular size in in-ceiling loudspeaker was no small task. The engineers at Origin have elegantly accomplished this feat. The Director D89 delivers on a promise of outstanding dynamics and articulation regardless of your choice in music or movies. Be it a dedicated music system or an entire home theater, the Director D89 will outperform the competition in every way.
Arriving Q4 in 2017
More Bass For Your Space
The amount of air a driver can move is a function of its surface area and the length of its throw or excursion. Driving the lower frequencies in the Director D89, is a long-throw 8-inch woofer, which has 80% more surface area than its 6-inch counterpart. However, our engineers have been able to fit this driver into an assembly the size of our competitor‘s 6-inch models. The result is a much smaller footprint with impressive bass. The woofer is carefully crafted from layers of Kevlar® fibers chosen for their lightweight and remarkable strength.
Tri-Linear Configuration (TLC)
The Director D89 features three drivers in a unique linear alignment. This three-way design allows for broader frequency response and superior power handling. The 3-inch midrange is made of woven Kevlar® and the tweeter is our proprietary DPSD radiator.
The ability to point or "direct" the sound toward a specific area in the room is critical when the speakers are mounted in the ceiling. The Director D88 features a mid-tweeter assembly that can be adjusted to focus the sound toward the listening area regardless of the speaker‘s position in the ceiling. This allows for the speakers to be used in many applications. One example is a home theater where the soundstage, relative to the screen, is crucial. The seating area can be off axis and still remain in the "sweet-spot."
Dual Plane Stabilized Diaphragm (DPSD™)
A patented innovation that dramatically improves high-frequency performance, the DPSD™ radiator uses a unique suspension design that maintains the tweeters alignment throughout a larger frequency range. The suspension is attached at both the voice-coil and the peak of the dome allowing the driver to be crossed over at a much lower frequency. This results in improved dispersion and decreased distortion.
X-Wave Woofer Surround
While in motion, frequencies between 700-1,400 Hz typically run up the cone of a woofer and are reflected back and forth from the center of the driver. This creates unwanted harmonic distortion. The X-Wave surround found in Origin woofers absorbs these frequencies reducing distortion and maintaining driver stability. This design also maximizes cone area by reducing the width of the surround.
As the driver travels to the limits of its excursion, the suspension, made up of the spider and the surround, becomes more rigid, exerting more control on the movement of the cone. The result is increased, clean power output throughout the driver‘s frequency range.
Compression Molded Woofer Baskets
Utilizing the latest techniques and materials in plastic fabrication, Origin is able to create basket designs with superior stability and acoustic neutrality. These baskets combine with the driver suspension to increase linearity and improve overall performance.
It is important when installing a loudspeaker in the ceiling that it be stable and secure, restricting the vibration of the assembly and limiting transfer of energy into the wall. The revolutionary Tool-Less Installation (Patent #9591390) spreads the weight of the speaker over a larger area than typical mounting systems accomplishing this result with minimal effort. Spring-loaded clips also create more uniform pressure against the drywall eliminating any warping or distortion of the speaker baffle.
Switches on the speaker baffle, on specific models, allow the installer to fine-tune the speaker‘s performance through independent bass and treble adjustments. This is essential as the speaker‘s proximity to adjacent walls and soffits can dramatically affect frequency response.
A paintable, perforated grille with a thin bezel covers the entire speaker assembly and leaves a discreet finished appearance. Its magnetic attachment makes removing or replacing the grille fast and easy.
Let it Sink in
With an IPX6 rating, the entire Director Collection is at the top of the class. This rating ensures that these high-performance are safe from the corrosion and internal damage commonly posed by exposure to ocean water and rainstorms--backed by a lifetime warranty.
Specifications Table Footer Model Number D89 Part Number SCD89000 Tweeter Dome Silk DPSD Tweeter Diameter 1" (25mm) Midrange Dome Kevlar Midrange Diameter 4" (102mm) Woofer Cone Kevlar Woofer Diameter 8" (203mm) Frequency Response 30Hz-20kHz Impedance 6 ohm minimum Recommended Amplifier Power 50 watts - 200 watts Depth 5.59" (142mm) Diameter 9.61" (244mm) Cutout Diameter 8.75" (222mm)
This product does not have a video.
- Instructions & Data Sheets
This product does not have any related items.